How to Improve Home Security with Better Locks: A Practical Guide
A new deadbolt screwed into a door frame held by half-inch screws is a strong lock attached to a weak structure. A door is a system: the bolt, the plate it slides into, the frame around that plate, the hinges on the other side and the door itself. A homeowner who spends $150 on a lock but never checks the plate or jamb may have changed less than they think.
This guide shows how to improve home security with better locks and the hardware around them. You’ll learn how to inspect what you have, understand what certification labels do and don’t mean, strengthen frames and secondary entrances, and decide between rekeying and replacing. It also explains where smart locks fit and when to bring in a locksmith. No lock is burglar-proof. The goal is to make forced and unauthorized entry harder and to remove the easy failures.
Quick answer: To improve home security with better locks, start with the weakest door rather than the fanciest lock. Check that the deadbolt and strike line up and work smoothly. Reinforce the strike plate and frame. Choose a deadbolt certified to a residential standard, and control who holds keys or codes. Never use a locking arrangement that could trap people inside during a fire.
How to Assess the Security of Your Existing Door Locks
Walk to every exterior door, including the one from the garage and the one nobody uses. Check:
Operation. Does the deadbolt throw fully and smoothly without lifting or pushing the door? A bolt that has to be forced is often not fully engaging the strike.
Alignment. Gaps between door and frame that vary along the edge suggest sagging or hinge wear.
Loose hardware. Wiggle the knob, lever, thumb-turn and cylinder collar. Movement means loosened fasteners.
Worn cylinders. Keys that stick, turn roughly or need jiggling point to wear or damage.
Frame condition. Look for cracks, splits or old repairs near the strike plate.
Key control. Count who has a key or code: former tenants, contractors, relatives, old roommates, cleaners.
Overlooked doors. Garage-to-house, basement and side doors often have the weakest hardware. Locksmith Ledger notes that many homeowners leave the door from the garage into the house unsecured, relying on the garage door alone.
The Home Entry-Point Security Audit later in this guide turns this walk-through into a checklist.
Which Types of Locks Are Suitable for Residential Security?
No single type is universally best. The right choice depends on the door, the household and the local code.
| Lock type | How it works | Typical use | Main caution |
|---|---|---|---|
| Single-cylinder deadbolt | Key outside, thumb-turn inside | Exterior doors, including the required egress door | If glass is within arm's reach of the thumb-turn, address the glass or door design rather than changing to a key-both-sides lock |
| Double-cylinder deadbolt | Key required on both sides | Sometimes proposed for doors near glass | Can trap occupants in a fire; commonly not allowed on the required egress door. Check local code before considering one |
| Keyed knob or lever lockset | Spring latch with key or push-button lock | Everyday latching; secondary lock on the same door | Not a substitute for a deadbolt on exterior doors |
| Keypad deadbolt | Code entry, battery-powered | Households sharing access without sharing keys | Codes can be shared or observed; battery plan needed |
| Smart lock | Connected lock managed by app or hub | Access control and activity records | Adds account, firmware and battery risks; a retrofit model keeps your existing bolt's strength unchanged |
| Mortise lock | Lock body sits in a pocket cut into the door edge | Older homes and some premium entry doors | Needs a deeper door cutout; service is usually a locksmith job |
| Upgraded cylinder | Replacement cylinder with extra key-control or tamper features | Doors where key duplication control matters | Verify claims through a certification listing; "high security" alone is not a standard |
Checkbook, a consumer-research nonprofit, takes a firm line on one category: it says key-in-the-knob locks have long been inadequate for security. A deadbolt adds the part that matters most on an exterior door: a solid bolt.
Understanding Residential Lock Grades and Certifications
“Heavy duty,” “high security,” “military grade” and “pick-proof” are marketing phrases. They are not certifications. What matters is whether a product has been independently tested to a named standard.
The Builders Hardware Manufacturers Association (BHMA) publishes the relevant ANSI standards. In 2015 it released its first residential-specific ones: ANSI/BHMA A156.39 for residential locksets and latches and A156.40 for residential deadbolts. They test security, durability and finish. A156.40 covers deadbolts and deadlatches used in single-family homes and multifamily dwellings, and a 2025 edition exists. Under the residential scheme, products are rated A (best), B (better) or C (good) in each category. One product can score differently in security than in finish, so read each rating, not just the label.
An older and more commonly quoted grading uses Grades 1 to 3. A BHMA standards director told PCWorld that ANSI grades 1 to 3 are for commercial use, and BHMA A, B and C ratings are for residential use. Packaging may still say “Grade 1” without naming which standard, which is why asking “Grade 1 under which standard?” is worthwhile.
| Claim or standard | What it covers | What to verify |
|---|---|---|
| ANSI/BHMA A156.40 | Residential deadbolts and deadlatches: security, durability and finish tests | Listing in the BHMA Certified Products Directory; "Certified Secure Home" label on packaging |
| ANSI/BHMA A156.39 | Residential locksets and latches (knob and lever sets), not deadbolts | Don't treat a lockset certification as proof the deadbolt is certified |
| A / B / C ratings | Separate ratings for security, durability and finish under the residential standards | Check the security rating specifically if forced-entry resistance is your priority |
| "Grade 1/2/3" | Older grading tied to standards such as A156.2 (bored and preassembled locks and latches), commercial-oriented | Ask which standard the grade refers to; look the product up in the directory |
| "Heavy duty," "high security," "pick-proof" | No standardized meaning; manufacturer language | Treat as unverified unless a named test or certification number backs it |
Independent certification means a recognized lab tested the product against a published standard. A manufacturer claim means the company says it meets one. Search the BHMA Certified Products Directory by manufacturer or model to tell the difference. Be aware that these standards cover the lock hardware only. They do not evaluate the app, cloud account or firmware of a connected lock, so a certified smart lock can still have digital weaknesses.
Why the Door Frame Matters as Much as the Lock
A deadbolt resists forced entry only as well as the plate and wood around it. When a door is kicked, the usual failure is the jamb splitting at the strike area, not the bolt shearing.
| Component | Role | Common weak point | Question to ask |
|---|---|---|---|
| Deadbolt | Holds door in frame | Partial engagement; loose mounting | Does the bolt extend fully into the strike? |
| Cylinder | Accepts the key; controls who can operate the lock | Wear; unknown key holders | Who still has a working key? |
| Strike plate | Receives the bolt | Thin plate; short screws into soft jamb only | Do the screws reach the framing behind the jamb? |
| Door jamb and frame | Carries the load when the door is struck | Cracks, splits, old repairs, rot | Is the wood sound around the strike? |
| Hinges | Carry the door and resist prying on the hinge side | Loose screws; outward-swinging doors with exposed pins | Are all hinge screws tight and the door level? |
| Door slab | The barrier itself | Hollow core; glass near the lock; damage | Is this a solid exterior-rated door? |
Practical steps, without promising specific resistance times:
Replace the standard strike with a reinforced one. Checkbook describes a security strike or strike box with holes for additional screws as a better option than the stock plate.
Use longer screws that reach the structural framing behind the jamb. Locksmiths commonly recommend this, and Locksmith Ledger describes reinforcing the frame with long screws into the sub-frame. Screw length depends on your frame, so I am not giving a number.
Tighten and level the hinges. An alignment problem can stop the bolt from engaging.
Consider a full-length door-edge or frame reinforcement kit if the jamb is intact but thin. If it is cracked or rotted, repair or replace the frame first.
How to Improve Front and Back Door Security
Front doors get the attention. Back doors often get weaker hardware, less lighting and fewer eyes on them. Treat both with the same audit, then adjust for how each is used:
Front door. Usually the most visible and most used. Prioritize a certified deadbolt, a reinforced strike and a solid slab. A viewing option such as a peephole or doorbell camera helps you decide whether to open it, and the camera guide covers that category in depth.
Back door. Check for glass panels, a flimsy slab and a lock rarely used. Because keys here are often left in locks or under mats, key control matters more than at the front.
How to Secure Garage, Side and Other Exterior Doors
The overlooked doors are the ones people don’t see daily:
Garage-to-house door. Treat it as an exterior door. It needs a deadbolt, a reinforced strike and a sound frame, since a garage can be opened or entered other ways.
Side doors and basement doors. Often older hardware and poor lighting.
Detached structures (shed, workshop, guest house) with tools or ladders inside. Locking them reduces what’s available for misuse elsewhere.
Doors with duplicate keys hidden nearby. Remove spare keys from obvious places.
How to Improve Sliding Door and Window Lock Security
Sliding glass doors and windows have different weaknesses from hinged doors. The built-in latch is often light-duty, and the panel can sometimes be lifted from its track. Common improvements are an auxiliary lock, a track device that blocks sliding, and anti-lift protection so the panel can’t be lifted out.
Window options include sash locks, pin locks and ventilation restrictors that let you open a window slightly while limiting how far it moves. These devices should not block a window used as an emergency exit. Bedroom windows commonly serve that purpose, so any device on them must open from the inside without a key or tool.
A “door jammer” or bar for sliding doors can be part of the answer, but treat any removable bar or block as something occupants must be able to remove instantly in an emergency. Before relying on any such device, check local requirements and household needs, especially with children or older adults. Ground-floor window protection and security glazing could fill their own guide, so this section stays at overview level.
Are Smart Locks More Secure Than Traditional Locks?
Not automatically. A smart lock changes how access is managed, not how strong the bolt and frame are. Checkbook points out that a retrofit smart lock uses your existing deadbolt, so it won’t improve the strength of the lock.
| Factor | Traditional keyed | Keypad (not connected) | Smart (connected) |
|---|---|---|---|
| Giving access | Copy a key | Share a code | Issue a code, credential or time-limited access |
| Removing access | Rekey or replace | Delete the code | Delete the code or credential |
| Activity records | None | Usually none | Often logged, depending on model |
| Remote control | No | No | Yes, via app or hub |
| Main failure points | Lost or copied keys; wear | Shared or observed codes; dead battery | Account compromise; outdated firmware; dead battery; connectivity loss |
| Backup access | Spare key (secured) | Often a mechanical key | Check whether a physical key, external battery contacts or both are provided |
| Digital security needed | None | Code hygiene | Strong password, multi-factor authentication, updates |
Where smart locks help: issuing and revoking access without cutting keys, temporary codes for contractors, activity records, and automatic re-locking.
Where they add risk: an account takeover, an unpatched firmware flaw, a depleted battery or a lost connection. The FTC advises that if a device offers two-factor authentication, you should use it, and CISA recommends multi-factor authentication where manufacturers offer it. Keep firmware updated, secure your router, and confirm how the lock can be opened if the battery dies or the Wi-Fi drops. If you want locks tied into routines with an alarm system, the Vivint home automation guide shows how one provider handles smart locks and automation. This page focuses on the lock hardware itself.
Rekeying vs Replacing Your Locks
Rekeying changes the internal pins so old keys stop working. The lock body stays. Replacement installs new hardware. Both end the old keys’ access, but they solve different problems.
| Situation | Rekeying usually fits when… | Replacing usually fits when… |
|---|---|---|
| Moving into a new property | Existing locks are sound and certified | Locks are old, worn or unknown quality |
| Lost or unaccounted-for keys | Hardware works well | Hardware is also damaged or outdated |
| Former occupants, roommates, contractors | You want one fresh key set across doors | You want to switch to keypad or smart access anyway |
| Sticking, grinding or damaged lock | Not suitable; rekeying doesn't fix wear | Yes, replace the damaged part or whole lock |
| Upgrading to a certified or stronger deadbolt | Not applicable | Yes |
| Renting | Often an easier request than swapping hardware; ask the landlord | Usually needs permission and keeping the original to reinstall |
For renters, lease rules matter more than lock preference. The renters’ security guide covers landlord permission and portability in more detail. Key control matters too: keep a short list of who holds each key, and rekey or replace after anyone with long-term access leaves your household or service relationship.
Common Mistakes When Upgrading Home Locks
Buying the lock and skipping the frame. The plate and jamb decide how much force the bolt can resist.
Trusting packaging language. “High security” and “heavy duty” are not certifications.
Installing a double-cylinder deadbolt for convenience or against glass. It can trap occupants in a fire and may violate local code on the required egress door.
Leaving a key in the inside cylinder “just in case.” That defeats the lock’s purpose if glass is nearby.
Upgrading only the front door.
Buying a retrofit smart lock expecting a stronger bolt. It keeps your existing deadbolt.
Using weak smart-lock accounts. Reused passwords and no multi-factor authentication undercut a good lock.
Skipping the battery plan. Know the backup access method before you need it.
Misaligned installation. A bolt that barely engages the strike weakens the whole door.
Forgetting who still has a key.
When Should You Call a Professional Locksmith?
DIY works for swapping a standard deadbolt on a prepared door, replacing a strike plate, or adding a keypad lock to existing holes. Call a professional when:
You need a mortise lock serviced or installed.
The door or frame needs cutting, structural repair or replacement.
The frame is cracked, rotted or severely out of square.
You are rekeying multiple doors to a master or matched key set.
You are unsure whether a locking arrangement complies with local fire or building code.
A lock has been tampered with or damaged.
You are installing security hardware for a household member who may need special access, such as someone who relies on a wheelchair or has dementia.
For the larger question of DIY versus professionally installed security systems, see the professional vs. DIY home security guide.
How Locks Work Alongside Other Home Security Measures
Locks resist entry. They don’t watch, alert or respond. Other layers do different jobs:
Cameras record events and help you see visitors. The home security cameras guide covers that category.
Alarm systems and door sensors detect an opened or forced entry point and trigger an alert.
Professional monitoring adds human dispatch. The guide to how home security monitoring works explains what monitoring can and can’t promise.
Exterior lighting reduces concealment around doors.
For system-level choices, start at best home security systems. Strong locks and a reinforced frame make those layers more useful, because they slow an entry attempt that the sensors and cameras then document.
A Practical Home Lock Security Improvement Plan
The Home Entry-Point Security Audit
Use this checklist on every exterior door. It is a structured inspection, not a score, and has no percentages.
| # | Area | Inspection question | Next action |
|---|---|---|---|
| 1 | Door construction | Is it a solid, exterior-rated door without damage or glass near the lock? | Replace a hollow or damaged slab; address nearby glass |
| 2 | Lock condition | Does it turn smoothly with a tight, unworn mounting? | Tighten, lubricate per manufacturer, or replace |
| 3 | Deadbolt suitability | Is there a deadbolt, and is it listed to a residential standard? | Look it up in the BHMA directory; upgrade if uncertified |
| 4 | Strike plate and frame | Is the plate reinforced, secured to framing, and is the jamb intact? | Fit a reinforced strike; repair the frame first if damaged |
| 5 | Hinge condition | Are hinges tight, aligned and carrying the door evenly? | Tighten or replace screws; realign the door |
| 6 | Key control | Can you list everyone holding a key or code? | Rekey, replace or remove codes after changes in who has access |
| 7 | Windows and sliding doors | Do latches hold firmly, and can the panel be lifted or slid open? | Add auxiliary locks or track devices that release quickly from inside |
| 8 | Smart-lock account and battery | Is multi-factor authentication on, firmware current and a backup method tested? | Enable MFA, update, test backup access, set a battery reminder |
| 9 | Emergency exit safety | Can everyone open every exit from inside without a key, tool or special knowledge? | Remove key-only interior locks and anything obstructing exits; confirm local code |
| 10 | Professional repair needs | Does anything need cutting, structural repair or code interpretation? | Hire a qualified locksmith or carpenter |
Priorities
Fix safety first (item 9). Any arrangement that could trap occupants goes before any upgrade.
Fix the weakest door (items 1 to 5). A cracked frame or hollow slab comes before an expensive lock.
Control access (item 6). Rekey or replace when keys have gone astray.
Cover secondary entries (item 7). Sliding doors, windows, garage and side doors.
Then consider convenience (item 8). Add a smart lock if it solves a real access-management problem, and secure the account.
Escalate (item 10) when the problem involves structure, code or tampering.
Final Recommendations
A better lock helps, but the improvement is only as good as the door around it. Choose deadbolts that appear in a recognized certification directory instead of trusting marketing terms. Reinforce the strike and check the frame. Don’t use key-both-sides locks on required exit doors, and confirm local requirements. Treat smart locks as an access-management tool with their own digital risks. No lock stops every attempt, so pair strong hardware with the other layers described above.
FAQ
Home Lock & Security FAQs
Practical answers to common questions about deadbolts, door hardware, and home security.
Can a better lock really improve home security?
Yes, if the door and frame can support it. A certified deadbolt in a damaged frame gains little.
What should I look for when buying a deadbolt?
Look for a listing in the BHMA Certified Products Directory under A156.40, smooth operation, solid mounting, and a reinforced strike plate. Don’t rely on “heavy duty” or “high security” wording alone.
Are deadbolts more secure than regular door locks?
Generally, yes, for exterior doors. A deadbolt’s rigid bolt is not a spring latch, and a spring latch alone does not resist forced entry well.
Is a double-cylinder deadbolt a good idea?
Usually not. It can trap people during a fire. The International Residential Code requires the required egress door to open from inside without a key, special knowledge, or effort. Check your local code.
Do door locks need professional installation?
Standard deadbolts on prepared doors are a common DIY job. Mortise locks, structural repairs, and uncertain code compliance are good reasons to call a professional.
Should I rekey or replace my lock?
Rekey when the hardware is sound and you only need to cancel old keys. Replace the lock when it is worn or damaged, or when you want a stronger or different type.
Are smart locks safe from hacking?
No device is immune. Use a strong, unique password and multi-factor authentication, keep the firmware updated, and know how to open the door mechanically if the battery dies.
How can I reinforce a door frame?
Fit a reinforced strike plate with screws that reach the framing, and add frame reinforcement if the wood is sound. Repair or replace a cracked or rotted jamb first.
How often should I replace residential locks?
There is no fixed interval. Replace locks when they show wear, stop operating smoothly, or no longer meet your needs. Rekey them when key holders change.
